Are you wondering if your electric hot water heater is still in good shape? One of the most important parts of keeping your energy costs low and the safety of your family high is regularly inspecting and maintaining your electric hot water heater in Columbus, OH. Fortunately, it doesn’t have to be difficult for anyone with a few basic tools.
By following this easy step-by-step guide you can find out quickly whether or not there are any problems with your hot water heater so that you can take steps to get it fixed before it becomes a problem. Read on to learn more about proper maintenance and detection of possible repairs needed to keep your family safe and lower bills!
Step 1: Turn off the power supply to your electric hot water heater. This should be done before any other steps are taken as it will prevent any potential electrocution or accidents.
Step 2: Inspect the outside of the heater for signs of rust or corrosion and if any is found contact a professional immediately as these can be dangerous and indicate that the interior of the heater is also damaged.
Step 3: Check for any signs of leakage or moisture around the hot water heater. If there are any puddles, this means a leak has developed somewhere and will need to be fixed immediately.
Step 4: Look at all hoses connected to your electric hot water heater and make sure they are not cracked or damaged. If they do appear to be in disrepair, these will need to be replaced as soon as possible before more damage is done.
Step 5: Check all valves connected to the electric hot water heater for any signs of rust or wear and tear. All valves must be in good condition for the hot water to function properly.
Step 6: Locate the thermostat and inspect it for any possible problems. If there are any signs of wear or damage, replace the thermostat as soon as possible to ensure that your electric hot water heater continues to operate efficiently.
Step 7: Open the drain valve of your electric hot water heater and inspect the inside for any sediment build-up or corrosion. If there is any present, contact a professional to get it removed as soon as possible.
Step 8: Close all valves, hoses, and drains connected to your electric hot water heater, and then turn on the power supply. Make sure to always monitor your electric hot water heater and check for any unusual noises or smells.
By following these simple steps and regularly inspecting your electric hot water heater, you can ensure that it is running efficiently and safely to keep your family safe and bills low!
What Are The Signs You May Have To Replace Your Electric Hot Water Heater?
- Age: Electric hot water heaters typically last 8-12 years before needing to be replaced. If your electric hot water heater is in this age range it may be time to consider a replacement.
- Leaking Tank: This could indicate that the tank has corroded and needs to be replaced as soon as possible.
- Loud Noises: Popping, banging, and rumbling noises coming from your electric hot water heater are a good indication that the heating elements or other internal parts may need to be replaced.
- Discolored Water: If you notice rusty colored water, this could indicate internal corrosion in the tank and you may need to replace the electric hot water heater.
- Not Enough Hot Water: If your electric hot water heater is no longer providing enough hot water, this could indicate that it needs to be replaced or its capacity increased.
- High Electric Bill: If you notice a sharp increase in your electric bill and cannot find another explanation, this could indicate that your electric hot water heater is working harder than normal and needs to be replaced.
It is always best to have an experienced professional inspect your electric hot water heater for signs of wear and tear so you can make sure it is in good condition. If any of the signs mentioned above are present, it is best to replace your electric hot water heater as soon as possible.